Installing roofing shingles is not that complicated. It is just a matter of following the steps and taking precautions on doing the process. Since you will be working in the roof you need to be careful in installing roofing shingles since wrong move could result in damage and accidents. There are things that you must consider before proceeding with the installation. Some of which includes the materials or types, the process, the steps and the safety measures. This article will enumerate some of the types and the process in installing roofing shingles.

It is important that you choose the right materials for your house. Additional equipment that is needed should be prepared before commencing with the process. In installing roof shingles, the most common process is the Asphalt shingles. It is done by starting from the lower part to the upper part of roof, nailing the shingles in place with the runner or beam. Most of the time two inches lines forms the upper part of the shingles, with the use of rubber roofing sealed nails. It is important that overlapping shingles must cover the line of the nail by one inch, to protect the nails and the roof frame.

Like asphalt, wood shingles is done by starting from the lower part to the upper layer of roof. Installing roof shingles in this method requires you to designate quarter inch between the sides of the shingles, and must be certain that there is no damage in the overlapping shingles and have space open into the roofs frame.

Hog back and half round tiles is installed by placing bed of mortar in the row of gutter joints. Again installing shingles in this type is done from the lower edge of roof to upper part. It is done by interlocking tiles usually done in from left to right direction.

Installing roof shingles that involves nailing the shingles in place is the slate roofs. It requires a slate that must first be prepared. It makes use of the special slate hammer

The most universal way of installing roof shingles is thru underlayment. It should have layer of fifteen pound felt paper asphalt below the shingles. It blocks the moisture but not the vapour. Only wooden shingles does not requires underlayer since maximum ventilation is needed in wooden shingle. If you just need to replace only the damaged shingles you need to visually check the underlayment if possible, however, if there are no leaks it is not worth inspecting it by removing lots of good shingles.

he flashing is important in installing roof shingles it prevent moisture entry wherever roof meets the vertical surface of wall. It is also used within protrusion such as ventilation pipes and chimneys. The highly recommended flashing materials are rolled aluminum, galvanized steel and cooper.
These are only some of the types of shingles that are commonly used.

Installing roof shingles does not requires special skills in order for you to do it. All you have to do is to follow the steps and within a few yours you are done. Safety measures in installing roof shingles are important to avoid injuries and further damages.